Product Details
RedNet A8R

RedNet A8R is a 1U, 8x8 analogue line-level I/O interface for any Dante audio-over-IP network with network and power supply redundancy.

Product Details
High-quality conversion with up to 119dB of dynamic range is provided through two rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A8R, or alternatively allows RedNet A8R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.
Technical Specification
Dynamic Range 118 dB A-Weighted (typical)
Output 1 x Male XLR
EIN -96dBu A-Weighted (typical)
Word Clock Input 1 x BNC 75 ‎Ω port (switchable termination)
Word Clock Output 1 x BNC 75 ‎Ω port
Frequency Response 20Hz – 20kHz ± 0.1dB
Supported sample rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
Signal-to-Noise Ratio 120dB A-Weighted (typical)
Network 2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
"0 DBFS Reference Input Levels elements 18 or 24dBu (switchable)
Frequency Response Inputs 20Hz – 20kHz ± 0.1dB
THD N Inputs <-130dB (0.00003)
Converter Dynamic Range 120dB A-Weighted (typical), 10Hz – 20kHz
0 DBFS Reference Levels 18 or 24dBu (switchable)
THD N <-100dB (0.001) unweighted, 20Hz – 20kHz; 23dBu input
Noise In Presence Of Signal -94dBu A-Weighted (typical)
Input To Output Or Input Crosstalk <-100dB unweighted, 20Hz – 20kHz; 23dBu input
Output To Input Or Output Crosstalk <-100dB unweighted, 20Hz – 20kHz;
News