MEZZO 322 AD 产品推荐
2 Channel Compact Install Amplifier with DanteTM/AES67
| Number of channels | 2 (+2 line level outputs), Dante/AES67 |
| Output power | 160w |
| Max output voltage / current | 142 Vpeak / 15.6 Apeak |
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) |
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz |
| Operating voltage | 90 V - 264 V |
| Power consumption | Standby |
| S/N ratio | >103 dB (20 Hz - 20 kHz, A weighted) |
| Crosstalk separation | -60 dB @ 1kHz |
| Input impedance | 10 kΩ to ground / 20 kΩ balanced |
| AD Converter | 24 Bit @ 48 kHz 125 dB-A Dynamic Range - 0.00x % THD+N |
| DA Converter | 24 Bit @ 48 kHz 115 dB-A Dynamic Range - 0.00x % THD+N |
| Internal precision | 32 bit floating point |
| Latency | 2.5 ms fixed latency architecture |
| Input equalizer | Parametric IIR |
| Crossover | Butterworth, Linkwitz-Riley, Bessel |
| Delay | 80 ms (per output) for time alignment |
| Limiters | RMS voltage, Peak limiter |
| Dimensions (L x H x W) | 275 mm x 40 mm x 210 mm (10.8 in x 1.6 in x 8.3 in) |
2 Channel Compact Install Amplifier with DanteTM/AES67
| Number of channels | 2 (+2 line level outputs), Dante/AES67 |
| Output power | 160w |
| Max output voltage / current | 142 Vpeak / 15.6 Apeak |
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) |
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz |
| Operating voltage | 90 V - 264 V |
| Power consumption | Standby:2w, Idle:14w |
| S/N ratio | >103 dB (20 Hz - 20 kHz, A weighted) |
| Crosstalk separation | -60 dB @ 1kHz |
| Input impedance | 10 kΩ to ground / 20 kΩ balanced |
| AD Converter | 24 Bit @ 48 kHz 125 dB-A Dynamic Range - 0.00x % THD+N |
| DA Converter | 24 Bit @ 48 kHz 115 dB-A Dynamic Range - 0.00x % THD+N |
| Internal precision | 32 bit floating point |
| Latency | 2.5 ms fixed latency architecture |
| Input equalizer | Parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop |
| Crossover | Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 24 dB/oct (IIR) |
| Delay | 80 ms (per output) for time alignment |
| Limiters | RMS voltage, Peak limiter |
| Dimensions (L x H x W) | 275 mm x 40 mm x 210 mm (10.8 in x 1.6 in x 8.3 in) |
