ACCESSORIES
Holder
Shock mount
Stereo boom
Foam windscreen
Spacer
Directional pattern | Cardioid |
Principle of operation | Pressure gradient |
Cartridge type | Pre-polarized condenser |
Effective frequency response | 20 Hz - 20 kHz |
Frequency range, ±2 dB, at 30 cm (11.8 in) | 40 Hz - 20 kHz |
Sensitivity, nominal, ±2 dB at 1 kHz | 10 mV/Pa; -40 dB re. 1 V/Pa |
Equivalent noise level, A-weighted | Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A)) |
Equivalent noise level, ITU-R BS.468-4 | Typ. 25 dB |
Distortion, THD < 1% | 136 dB SPL RMS, 139 dB SPL peak |
Dynamic range | Typ. 121 dB |
Max. SPL, THD 10% | 159 dB SPL peak |
Rated output impedance | 200 Ω |
Minimum load impedance | 2 kΩ |
Cable drive capability | 100 m (328 ft) |
Output balance principle | Impedance balancing with Active Drive |
Common mode rejection ratio (CMRR) | > 60 dB |
Power supply (for full performance) | 48 V Phantom power (± 4 V) |
Current consumption | 2.8 mA |
Connector XLR-3M. Pin 1 | shield, Pin 2 |
Color | Matte black |
Maximum output voltage, RMS | > 5 V |
Polarity | +V at pin 2 for positive sound pressure |
Temperature range | -40°C to 45°C (-40°F to 113°F) |
Relative humidity (RH) | Up to 90% |
Matching tolerance (frequency response and sensitivity) | ±1 dB |
Phase deviation for kit | < 10° |
Product Manual |
---|
3511A.pdf |
DPA Catalog 17-18 CN new.pdf |
4011A XY-ORTF Stereo Kit with full accessories
Directional pattern | Cardioid |
Principle of operation | Pressure gradient |
Cartridge type | Pre-polarized condenser |
Effective frequency response | 20 Hz - 20 kHz |
Frequency range, ±2 dB, at 30 cm (11.8 in) | 40 Hz - 20 kHz |
Sensitivity, nominal, ±2 dB at 1 kHz | 10 mV/Pa; -40 dB re. 1 V/Pa |
Equivalent noise level, A-weighted | Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A)) |
Equivalent noise level, ITU-R BS.468-4 | Typ. 25 dB |
Distortion, THD < 1% | 136 dB SPL RMS, 139 dB SPL peak |
Dynamic range | Typ. 121 dB |
Max. SPL, THD 10% | 159 dB SPL peak |
Rated output impedance | 200 Ω |
Minimum load impedance | 2 kΩ |
Cable drive capability | 100 m (328 ft) |
Output balance principle | Impedance balancing with Active Drive |
Common mode rejection ratio (CMRR) | > 60 dB |
Power supply (for full performance) | 48 V Phantom power (± 4 V) |
Current consumption | 2.8 mA |
Connector XLR-3M. Pin 1 | shield, Pin 2: signal + phase, Pin 3: - phase |
Color | Matte black |
Maximum output voltage, RMS | > 5 V |
Polarity | +V at pin 2 for positive sound pressure |
Temperature range | -40°C to 45°C (-40°F to 113°F) |
Relative humidity (RH) | Up to 90% |
Matching tolerance (frequency response and sensitivity) | ±1 dB |
Phase deviation for kit | < 10° |
Product Manual |
---|
3511A.pdf |
DPA 产品手册.pdf |